UV Fade & Grime,
Sealed Out for Years
HAUT Ceramic is a dual-layer 9H sealant that bonds directly to your clear coat or PPF, blocking the UV exposure that fades paint and protecting the resale value of your vehicle for years — not months.
✦ Why Get HAUT Ceramic
More Than a Shine —
A Maintenance Plan.
Preserves resale value — keeps your factory finish free of the swirl marks and fading that flag a car as poorly maintained.
Cuts wash time and ends wax appointments for good — one application, years of hydrophobic gloss.
Deepens color and gloss by filling micro-imperfections in the clear coat for a wetter-looking finish.
Blocks the UV exposure that causes clear coat oxidation, chalking, and fade.
Adds 9H-hard resistance to swirl marks and light chemical etching from bird droppings and road salt.
Protects PPF and vinyl wraps from staining and premature yellowing with a sacrificial top layer.
Repels water and grime on contact — a 110–120° contact angle means most dirt rinses off with plain water.
What It Does
Chemical Sealant,
Not a Physical Barrier
Hydrophobic Surface
Static water contact angle of 110–120° — grime and water bead off on contact instead of drying onto the surface.
9H Hardness Rating
Dual-layer ceramic cures into a glass-like shell that resists swirl marks and light chemical etching.
UV Inhibitor Layer
Blocks the UV radiation responsible for clear coat oxidation, chalking, and fade — the damage that quietly erodes resale value.
Gloss Enhancement
Fills micro-imperfections in the clear coat for a deeper, wetter-looking finish under direct light.
✦ Professional Application
Why This Isn't
a DIY Spray Bottle Job.
HAUT Ceramic bonds to the surface at a molecular level — once it cures, it's permanent. There's no wiping it off and starting over. Every vehicle goes through multi-stage paint correction and a dedicated degreasing pass before a single drop of coating touches the panel, because the coating locks in whatever is underneath it — contamination, swirl marks, or oils from a rushed prep all get sealed in permanently along with the gloss.
A botched DIY application doesn't wash out — removing a cured ceramic shell takes machine polishing to cut it back off the clear coat. Our certified master installers hand-apply HAUT Ceramic panel by panel inside a climate-controlled bay, then infrared-cure and water-test every vehicle before it leaves, so it's done right the first time.
UV Fade & Resale Value Defense
HAUT Ceramic is a dual-layer 9H sealant that bonds directly to your clear coat or PPF, blocking the UV exposure that fades paint and the road grime that dulls resale value. One application, years of hydrophobic gloss — no more wax appointments.
- ✓Dual-Layer 9H Ceramic Shell
- ✓Hydrophobic Nano Coating
- ✓UV Inhibitor — Fights Fade
- ✓Full-Vehicle Application
- ✓Showroom Gloss Enhancement
Combine With Paint Protection Film
Ceramic coating adds gloss and hydrophobic performance — it does not stop rock chips. For full protection, pair it with self-healing optical film on the panels that take the most impact.
View PPF Packages →✦ Common Questions
HAUT Ceramic,
Answered.
HAUT Ceramic is a single application that holds its hydrophobic gloss for years, not months — unlike a spray sealant or wax that washes out after a handful of cleanings. Actual lifespan depends on parking conditions and wash habits, which we'll walk through at your consultation.
Yes, if your paint has swirl marks, light scratches, or oxidation. HAUT Ceramic bonds directly to whatever is on the surface when it cures, so any defects underneath get sealed in permanently along with the gloss. Every application starts with a multi-stage machine correction to remove them first.
Touchless automatic washes are safe. We recommend avoiding automatic brush washes — the stiff bristles will dull the hydrophobic finish faster than hand washing or a touchless wash with pH-neutral soap.
Yes. HAUT Ceramic bonds to clear coat, paint protection film, and vinyl wrap alike, adding a sacrificial hydrophobic layer on top — it takes the UV and chemical exposure that would otherwise stain or prematurely yellow the film underneath.
How Ceramic Coating Is Applied
From Paint Correction
to Hydrophobic Cure
Every ceramic coating application at HAUT follows a 4-step process — multi-stage paint correction, surface degreasing, dual-layer 9H application, and infrared curing. See the full breakdown alongside our PPF and window tint process.