Ceramic IR film blocks the heat and UV exposure that fade interior trim and crack dashboards — cut from the same HAUT Precision Scan patterns as our PPF, installed by Bergen County's certified master installers.
✦ Benefits of Window Tint
Cuts cabin heat on hot days, so the interior cools down faster and the A/C works less to keep it that way.
Blocks the UV radiation that fades interior trim, cracks dashboards, and reaches skin on long drives.
Adds privacy by reducing visibility into the cabin from outside.
Cuts glare from direct sun and oncoming headlights at night.
Gives the exterior a cleaner, more finished look.
Available Darkness (VLT)
New Jersey law requires front side windows and the windshield to let in more than 70% of light — darker shades are available for rear side windows and the rear windshield. We'll confirm the legal shade for each window at your consultation.
Film Specifications
Non-metallic ceramic particles block infrared heat without interfering with radio, GPS, or phone signal.
Blocks the UV radiation responsible for interior fading, cracked dashboards, and prolonged skin exposure while driving.
HAUT Precision Scan patterns plotted for every window — no hand-trimming against the glass.
Pressure-activated adhesive cures clear with no visible bubbling or haze over time.
✦ Professional Installation
Curved rear windows, quarter glass, and wraparound backlights don't take film flat — each pane is heat-shrunk to match its exact contour before it's applied, using patterns cut by our HAUT Precision Scan glass-cutting system so no one is hand-trimming against the edge of your glass with a blade.
Every install finishes with edges trimmed to the dot-matrix border built into your factory windshield and rear window, then inspected for haze, bubbling, or lift under direct light before the car leaves the bay — the same optical clarity check we run on every PPF and ceramic install.
Tint Packages & Pricing
All packages use the same ceramic IR film. The difference is window coverage — not film quality.
Daily Heat & UV Defense
Ceramic IR film on the front driver and passenger windows — the two panels that take the most direct UV exposure and cabin heat on every drive. HAUT Precision Scan-cut for a factory-clean edge with zero bubbling.
Full Windshield Heat Defense
Full-coverage ceramic IR film across your entire windshield — a light, legal shade that cuts heat and glare without darkening your view, the front glass most tint packages leave exposed. HAUT Precision Scan-cut to your windshield's curve for a factory-clean edge with zero bubbling.
Full Cabin Heat & UV Defense
Ceramic IR film across every side and rear window, cut to each window's exact profile. Blocks the infrared heat and UV radiation that fade interior trim and crack dashboards — without the signal interference of metallic film.
All prices are starting points. Final pricing depends on vehicle size, panel condition, and selected film brand. Schedule a consultation for an exact quote.
Compare Packages
| Coverage | Front Windows$199 | Windshield Tint$299 | Full Vehicle Tint$799 |
|---|---|---|---|
| Front Driver & Passenger Windows | ✓ | — | ✓ |
| All Rear Side Windows | — | — | ✓ |
| Rear Windshield | — | — | ✓ |
| Ceramic IR Film | ✓ | ✓ | ✓ |
| No-Bubble Adhesive | — | ✓ | ✓ |
| Full Windshield Coverage | — | ✓ | — |
✦ Complete the Protection
Tint protects the cabin — PPF protects the paint. Self-healing film absorbs rock chips and road debris on the panels that take the most impact.
View PPF Packages →A dual-layer 9H sealant that adds hydrophobic gloss and UV protection to your factory paint, cutting wash time down to a rinse.
View Ceramic Coating →✦ Common Questions
New Jersey law requires front side windows and the windshield to let in more than 70% of light, so both can only take the lightest legal shade. Rear side windows and the rear windshield can go as dark as 5% VLT. We'll confirm the legal option for each window at your consultation, so what you drive off with is street-legal from day one.
No. HAUT uses ceramic IR film with non-metallic particles, so it blocks heat without interfering with radio, GPS, or phone signal — unlike older dyed or metallic films.
Give the adhesive several days to fully cure before rolling a freshly tinted window down — exact timing depends on the film and the weather. We'll walk you through the timeline for your vehicle at pickup.
Yes. Window tint is applied to the glass, so it doesn't interact with PPF or ceramic coating on the painted panels — most clients combine all three in one visit.
How Window Tinting Is Applied
Every tint install at HAUT follows a 4-step process — glass prep, HAUT Precision Scan pattern cutting, heat shrinking, and dot matrix edge trim inspection. See the full breakdown alongside our PPF and ceramic coating process.
